Squares, pitch and waste
One roofing square covers 100 square feet of roof surface. The footprint gets multiplied by a pitch factor (the square root of 1 + (rise/12)²), so a 6/12 roof has about 12 percent more surface than its footprint. A waste factor covers cutting at hips, valleys and rakes. Estimates normally round shingle quantities to the nearest third of a square because shingles come three bundles to a square.
Why the ice barrier matters in Michigan
Michigan’s residential code generally calls for an ice barrier at the eaves in areas with a history of ice damming, extending from the edge to a point at least 24 inches inside the exterior wall line. When a damaged roof is replaced, that barrier is often a required item that should appear in the estimate. The calculator converts your eave length and overhang into rows of a standard 3-foot roll so you can check the quantity. Confirm the code with your local building department; requirements can be adopted with local amendments.
For hail and wind roof disputes, see our hail and roof damage appraisal page.
Questions about this tool
Why does my estimate show fewer squares than my roofer?
Common causes are a lower waste factor, a wrong pitch, or missed areas such as dormers and porches. Compare the measurements line by line.
What pitch triggers steep charges?
Estimating software usually adds steep-roof labor from 7/12 or 8/12 and up, and high-roof charges for two-story walls. Check how your estimate handles both.
Does every Michigan roof need ice barrier?
Code requirements depend on the jurisdiction and project. Michigan’s residential code generally requires it where ice damming is a known risk, which covers most of the state.
